SINGER 147-28 - Manual (Page 18)

22 NUMERICAL LIST OF PARTS
No. Plate
59537 20648
59538 20647
59538 20648
59539
59539
60656 20677
61047 20646
61067 20671
61075 20672
64255 20641
64259 20669
64319 20646
64320 20646
64330 20646
64331 20646
64336 20648
64351 20669
64355 20669
64356 20647
64386 20641
64388 20641
64508 20669
64805 20669
64805 20669
68062 20675
68063 20675
68064 20675
Name
Tension (upper thread) Spring Bushing
(large)........................................................................
Tension (under thread) Spring Bushing
(small).......................................................................
Tension (upper thread) Spring Bushing
(small).......................................................................
Tension (under thread) Screw Stud 50336C
with 51570C...............................................................
Tension (upper thread) Screw Stud 50326C
with 51570C...............................................................
Bench Stand Hinge for 79611............................................
Presaer Bar Lifting Bracket with 46CC
and 1872....................................................................
Feed (front) Bar Hinge Pin Collar with
1034F.........................................................................
Presser Bar Lifting Lever Connecting Pin
Arm Rock Shaft Crank (front) with 4S3C,
for 68119...................................................................
Balance Wheel, 2 In. dlam. pulley, with
two 51283C................................................................
Needle Bar (hollow) for 54274...........................................
“ " Bushing (upper)............................................
Presser Bar with 25303.......................................................
“ “ Bushing (lower)..........................................
Slack Thread Controller......................................................
Thread (under) Nipper Cara with 4613C, for
54433..........................................................................
Thread (under) Take-up Thread Guard for
64433.........................................................................
Thread (under) Take-up Thread Guard
Steady Pin..................................................................
Arm Rock Shaft Bushing (back).........................................
" “ " ", (Intermediate)...
• Rotary Shaft Bushing, Intermediate
(right) Oil Pad, long (braided
cotton) for 54089.......................................................
Arm Rotary Shaft Bushing, Intermediate
(right) Oil Pad, short (braided
cotton) for 54089.......................................................
Arm Rotary Shaft Flanged Bushing Oil
Pad, short (braided cotton) for
54090.........................................................................
Feed (back) Dog, 7 teeth (8 teeth to the
Inch) for 1/8 In. to 1/4 In. gauges,
for 68070....................................................................
Feed (front) Dog, 5 teeth (8 teeth to
the Inch) for 1/8 In. to 1/4 In.
gauges, for 68070.......................................................
Presser Foot Compensating Plate (left)
for 68067....................................................................
NUMERICAL LIST OF PARTS 33
No. Plate Name
68065 20675 Presser Foot Compensating Plate (right)
for 68067....................................................................
68066 20675 Presser Foot Plate for 68067..................................
68067 20675 Presser Foot (compensating, hinged) com­
plete, Nos. 26276 , 54411, 68064 to
68066, four each 1449F and 24701....
68068 20675 Throat Plate Seam Guide for 68070...............................................
68069 20675 " " for 68070...........................................
66070 20675 " " 680G9 With 68068, for 1/8
In. to 1/4 in. gauges, for 68062,
68063, 68159 and 131845..........................................
68079 20672 Face Plate........................................................................................
68118 20641 Arm Rock Shaft for 68119....................................................
68119 -------- " " " 68118 with 54004 and 64255
68129 20648 Thread (upper) Nipper Body for 68137....
68130 20648 “ " " Disc (inside) for
68137..........................................................................
68131 20648 Thread (upper) Nipper Disc (inside)
Washer (fibre) for 68137............................................
68132 2 0648 Thread (upper) Nipper Disc (outside) for
68137..........................................................................
68133 20648 Thread (upper) Nipper Roller for 68136..
68134 20648 B .. « « pjjj
for 66136....................................................................
68135 20648 Thread (upper) Nipper Stud for 68136....
68136 -------- " " " " 68135 with
68133 and 68134, for 68137......................................
68137 -------- Thread (upper) Nipper complete. Nos.
1698R,13218,59456,68129 to 68132 and
68136..........................................................................
68138 20648 Thread (upper) Nipper Thread Guide.............................................
68158 20673 Cloth Plate Slide (right) for 68159.................................................
68159 -------- Cloth Plate Slide (right) complete for
Throat Plates 54413 and 68070, for
1/8 In. to 1/4 In. gauges, for
131845, Nos.38419,68158 and two 725J
68164 20648 Thread (upper) Take-up Plate Spring for
131335........................................................................
68184 20672 Presser Bar Lifting Lever Ebctenslon...................................
68208 20672 " " * Lever............................................
68222 20633 Belt Guard with two wood screws 1 In.
No. 12 F.H...................................................................
68261 20648 Tension (upper thread) Releasing Shaft
Spring..........................................................................
68350 20669 Crank Connecting Rod Oil Cup for 54259..
68364 20676 Feed (back) Dog, 12 teeth (14 teeth to
the Inch) for 1/8 In. to 1/4 In.
gauges, for 54413.......................................................
68547 20677 Wrench for 51044 (Accessories)....................................................