Fitting shank and, Quilting seam guide, Fitting of presser feet – SINGER W1855 User Manual
Page 9: Fitting shank and quilting seam guide
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
FITTING SHANK
AND
QUILTING SEAM GUIDE
Raise the presser bar and fit shank as
shown.
(1)
Insert
quilting/seam
guide
carefully so as not to damage the holding
spring. (2)
FITTING OF PRESSER FEET
Raise the presser foot. Puli the one-touch
lever towards you and the foot will be
released. Centre new foot under shank.
Lower shank until groove is directly
above and touching the pin. Pull one-
touch lever towards you and the foot will
become engaged. {3, 4)
PrasMr bar
Shank tat tcraw
Looian
Shank
'Pratsar bar
.Groove
holding spring
Quilter
receiving
hole
Shank
J
v:
5
-
Advertising