Changing needle – SINGER W1015 Elgin User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Set needle in the highest
position by turning handwheel
towards you.
Changing Needle
Loosen needle clamp screw and
take out needle.
With flat face away from you,
insert a new needle into groove
of needle bar.
Push
needle
until
it
reaches
stopper @ and tighten needle
clamp screw firmly.
Always use a straight needle with
a sharp point.
Proper needle
Advertising