Adjusting lower tension, Drop feed lever – SINGER W1015 Elgin User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Adjusting Lower Tension

To test bobbin tension, hang and

shake bobbin case as shown.

At proper tension bobbin case

will

gradually

drop

a

small

amount.

To adjust tension, turn adjusting

screw with small screwdriver.

Raise

needle

position.

the highest

Leave end of thread of about 10

cm (4") from bobbin case.

Take hold of latch and push

bobbin case into hook.

Release latch when bobbin case

is fully inserted.

Drop Feed Lever

The lever is on right side of hook.

To lower feed dog, move lever

down to

AA

position.

This position is for button sewing,

darning and embroidery.

For normal sewing, move lever

.up to ^position.

1 2

-

- M

Advertising