Zipper foot – SINGER W311 BBS User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Öse this guide for making parallel rows of straight or decora
tive stitching. Attach standard pressar foot. Slip U shaped holder
on guide under presset foot thumb screw from the back and
tighten screw Adjust the curved bar for the distance desired
between rows of stitches and set so it presses slightly on the
fabric. By letting the guide ride on the previous stitching line,
successive rows will be an equal distance apart.
QUILTING GUIDE
ZIPPER FOOT
Remove the presser foot as previously described, and attach
the Zipper Foot with the same screw as illustrated.
By releasing the adjusting screw at the back of the foot,
the foot can be moved to the left or right of the needle,
according to which side of the zipper or cording is being
sewn.
25
liri---"' -'i:’