Removing the bobbin case – SINGER W311 BBS User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
V■■■„■,.-i'-rv.
■■
•^,v;.'.
-■I'-v.
I;".'..'ll
■ ■ ■ '■ -1."'
Our new type hinge plate supersedes the slide plate.
To open, place finger in recess and lift.
OPENING OR CLOSING THE HINGE PLATE
REMOVING THE BOBBIN CASE
Turn the balance wheel toward you until the needle bar
at its highest position.
Lift the hinged plate and insert thumb and forefinger of le
hand.
Open the latch of the bobbin case as shown and take out th
bobbin case by holding the latch.
Inportant—The shuttle hook and bobbin case can be knocke
out of position if you use a bent needle, or try to take oi
the bobbin case when the needle bar is lowered.
Advertising