Machine base oil drain jar, Thread unwinder – SINGER 147-82 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
18
MACHINE BASE
No. Plate
Name
131328
------- Machine Вазе and Oil Drain Jar (swinging
type) complete,Nos.131264 and 131268
MACHINE BASE OIL DRAIN JAR
(SWINGING TYPE)
No. Plate
Name
131185
20526
Jar (glass).....................................................................
131191
20526
" Cap.........................................................................
131188
20526
" Clamp.....................................................................
131217
-------- "
"
131188 with 131189................................
131189
20526
"
" Lever..............................................................
1247C 20546
''
"
" Hinge Screw.....................................
131265
20526 Nipple (long)..........................................................................
131266
20526
"
(short)..............................................................
131267
20526
"
Elbow...............................................................
131268
------- Machine Base Oil Drain Jar (swinging
type)
complete,Nos.
131185,131191,
.131217,131266
and
two
each
1247C,
131265 and 131267..............................................
THREAD UNWINDER
FOR TWO SPOOLS
Name
Spool Rest (for two spools) with 201018C
"
" Cushion (felt)...............................................
"
" Rod..............................................................
Set Screw......................................
Set Screw...............................................
" Stand with 200383C...............................................
Thread Guide.................................................................
"
"
Lock Nut.....................................
■'
" Position Cup............................................
"
"
Rod with 208E and 225322...
"
"
" Screw......................................
......................... Washer...........................................
" Separator..............................................................
"
”
150085 with 150059................
Bracket.....................................
"
"
" Arm with 164J
and 9525................................................................
Thread Separator Bracket Arm Clamping
Screw....................................................................
Thread Separator Bracket Arm Clamping
Screw Washer.......................................................
Thread Separator Bracket Arm Screw...........................
"
"
"
"
" Washer
No.
Plate
225257
20787
150203
20787
225388
20787
200383C
20546
201018C
20546
202490
20787
225391
20787
201696J
20546
225326
20546
225324
20787
20 8E
20546
225322
20546
150085
150086
20787
150059
150060
20787
164J
20546
9525
20546
164J
20546
9525
20546
THREAD UNWINDER
19
No.
150087
Plate
Name
----- Thread Separator complete,Nos.164J,9525,
150060 and 150086..........................................
150088
20787 Thread Unwinder complete,Nos.150087,
201696J, 208490,285257,225384, .885386,
225388, two each 150203,825^1 and
three wood screws 7/8 In.No.12.....................
27739
20561 Thread Cone (wood) for large cones..............................
235390
20561
"
" Holder, for Inverted cones..
Note:
Nos. 27739 and 225390 are used with, but not
Included In 150088.
S I N G E R Needles should be used
in S I N G E R Machines.
These Needles and fheir Containers
are marked with the
Company's Trade Mark “SIMANCO.'* *'
Needles in Containers marked
“FOR SINGER MACHINES"
are NOT
S I N G E R
made needles.