SINGER 147-82 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the part NUMBER In the
FIRST column.
The number stamped on a Sewing Machine Part Is In every
case the number of the single part only.
Every combination of parts sent out as such has Its spec­
ific number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always Indicates the SAME PART In whatever list
It appears, or for whatever machine.
The letters after some of the numbers Indicate the style of
finish only, as follows:
A-Hardened, Polished, Nickel Plated and Buffed
B-Pollshed, Nickel Plated and Buffed
C-Hardened Only
D-Pollshed Only
E-Soft, Not Polished
F-Hardened and Polished
F.J-Hardened, Polished and Nickel Plated
Q-Brlght Rumbled and Nickel Plated
H-Blued
J-Nlckel Plated Only
K-Hardened and Nickel Plated
L-Brass Plated
M-Oxldlzed
N-Japanned, Dull
P-Japanned, Bright
R-Merllzed
S-Cadmlum Plating
T-Copper Plated
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed
T.B-Copper and Nickel Plated and Polished
T.J-Copper and Nickel Plated Only
T.K-Hardened, Copper and Nickel Plated
T.M-Copper Plated and Oxidized
T.L-Copper and Brass Plated
U-Zlno Plated
V-Sllver Plated
V-Pollshed and Nickel Plated
Y-Black Nickel Plated Only
Z-Chromlum Plated
Z.B-PoiIshed, Nickel Plated, Buffed and Chromium Plated
Z.J-Nlckel and Chromium Plated
These letters MUST BE USED when they appear In the list;
and AFTER the number as In the list.
In this series:
1 to 1500, 50001 to 51500 and 140001 to 142000
e.re Screw Numbers
1501 to 1800 and 51501 to 51800 are Nut Numbers
1801 to 2000 and 51801 to 52000 are Roller Numbers
2001 to 50000 and 52001 to 140000 and 142001 to
190000 are Sewing Machine Parts, 190001 and upward
are numbers of Electrical Parts.
The figures In the second column refer only to the plates.
Illustrating the parts, and are NOT TO BE USED In ordering.
Parts narked with an asterisk (•) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 147-82
For Seaming Medium and Medium Heavy Pants, Overalls
and Work of a Similar Nature. One needle, one looper. Ball
bearing. Needle bar stroke I 5/16 inches. The looper is arranged
so that it may be thrown out of position for convenience in thread­
ing. An improved oiling system automatically oils all of the
principal hearings of the machine. Speed 4000 R. P. M.
No.
131446
.Plate
Arm,
68428 20529 Arm
68429 20529 n
1057C 20530 "
50608R 20530 I t
139017 20530 Arm
68350 20530
(1
•68430 Arm
131309 20529
Name
, upper and lower (solid) with 948J,
15404,68483,two 15405 and four
131032..................................................................
Bottom Cover........................................................
" Gasket (cork)..................................
" " Screw..............................................
Hole Plug Screw, for access to Crank
Connecting Rod (upper bearing)...........................
Hole Plug Screw Washer......................................
Oil Cup, for oiling Arm Rock Shaft
Front Bearing.........................................................
Oil Cup, for 131309..............................................
" " 68430 with 131310,for fill­
ing oil reservoir.....................................................