SINGER 147-102 - Manual (Page 10)

13
MACHINE No. 147-103
For Lap Seam Felling Side Seams on Medium and Medium
Heavy Pants, Overalls and Automobile Seat Covers. Two needles,
two loopers. Gauges 3/32 inch to 1/2 inch. Ball bearing. Needle
bar stroke I 3/8 inches. The loopers are arranged so that they
may be thrown out of position for convenience in threading. An
improved oiling system automatically oils all of the principal
bearings of the machine. Speed 3800 R. P. M.
NOTE: THIS MACHINE IS THE SAME AS THE 147-102
MACHINE WITH THE FOLLOWING EXCEPTIONS:
No. Plate
131072 20566
131510
68459
131529 20590
•131579
131580 20581
131292 20581
•131231
•131232
4604 20581
131196 20581
131545
128390
665J 20561
131547
131548
131549
26276 20565
131534
Name
Arm Rock Shaft Crank (back) ball bearing
solid, with twD 50083C, in place of
131486..................................................................
Arm Rotary Shaft 131487 with 640E, 684.59
131111 and 131502,in place of 131488
Crank Connecting Rod 131471 with 131072,
in place of 131489...............................................
Feed Dog, 14 teeth (10 teeth to the Inch)
for 1/4 in. to 3/8 In. gauges, for
131536.................................................................
Looper Holder Body.....................................................
" 131579 with 4.52C and
1120C, in place of 131052...................................
Presser Bar Bushing (lower) in. place of
131006..................................................................
Presser Bar Spring (auxiliary).......................................
" Guide............
" " Rivet.
Presser Bar Spring (auxiliary) complete.
Nos. 4604, 131231 and 131232............................
Presser Foot Plate..........................................................
” Hinge Stud.................................
Position
Screw....................................................................
Presser Foot Shank........................................................
Yielding Heel....................................
Connection...
'' " Hinge
Pin.........................................................................
Presser Foot Yielding Heel Connection
Spring....................................................................
PARTS FOR MACHINE No. 147-103 19
No. Plate
26276 20565
131550 20590
131536 20590
Name
Presser Foot Yielding Heel Hinge Pin... .
Presser Foot (triple hinged) complete,
for 3/16 in. to 3/8 in. gauges. Nos.
131534, 131546 to 131549 and two
each 665J, 26276 and 128390...............................
Throat Plate, for 1/4 In. to 3/8 In.
gauges, for 131529................................................
SINGER Needles should be used
in SINGER Mach ines
These Needles and their Containers
are marked with the
Company’s Trade Mark "SIMANCO.**"i
Needles in Containers marked
■'FOR SINGER MACHINES"
are NOT SINGER made needles.