SINGER 147-102 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use CMLY the part NUMBER In the
FIRST coiumn-
The number stamped on a Sewing Machine Part is In every case
Che number of the single part only.
Every combination of parts sent out as such has its ’peclflc
number, which, although not stamped on the parts, must be used
when ordering the combination.
Each number always Indicates the SA^E PART In whatever list
It appears, or for wliatever machine.
The letters aTter some of the numbers Indicate the style of
finish only, as follows:
A-Hardened, Polished, Nickel Plated and Buffed
B-Poll3hed, Nickel Plated and Buffed
C-flardened Only
D-Pollshed Only
E-Soft, Not Polished
F-Hardened and Polished
F.J-Hardened, Polished and Nickel Plated
0-Brlght Rumbled and Nickel Plated
H-Blued
J-Nlckel Plated Only
K-Hardened and Nickel Plated
L-Brass Plated
M-Oxldized
N'Japanned, Dull
P-Japanned, Bright
R-Merllzed
S-Cadmlum Plating
T-Copper Plated
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed
T.B-Copper and Nickel Plated and Polished
T.J-Copper and Nickel Plated Only
T.K-Hardened, Copper and Nickel Plated
T.L-Copper and Brass Plated
T.M-Copper Plated and Oxidized
U-Zlnc Plated
V-Sllver Plated
W-Pollshed and Nickel Plated
X-Black Oxide, for Iron and Steel
X.C-Hardened and Black Oxide, for Iron or Steel
Y-Black Nickel Plated Only
Z-Chrotnlum Plated
Z.A-Hardened,Polished,Nickel Plated,Buffed and Chromium Plated
Z.B-Pollshed, Nickel Plated, Buffed and Chromium Plated
Z.c-Hardened and Chromium Plated
Z.J-Nickel and Chromium Plated
These letters MUST BE USED when, they appear In the list; and
A>'TER the number as In the list.
In thli. series:
1 to 1500, 50001 to 51500 and 140001 to 143000
are Screw Numbers
1501 to 1000 and 51501 to 51800 are Nut Numbers
1801 to 3000 and 51801 to 53000 are Roller Numbers
3001 to 50000 and 53001 to 140000 and 143001 to
190000 are Sewing Machine Parts, 190001 and upvjard
are numbers of Electrical Parts.
The figures In the second column refer only to the plates,
Illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (•) are furnished only when
repairs are made at factory.
When ordering parts which differ as to Gauge (the distance
between seams) the Gauge, as well as the Number must be given on
order.
LIST OF PARTS COMPLETE
FOR
/AACHINE No. 147-102
For Lap Seam Felling Medium and Medium Heavy Work
Shirts, Jumpers, Overalls and Work of a Similar Nature. Two
needles,two loopers. Gauges 3/32 inch to 1/2 inch. Ball bearing.
Needle bar stroke I 5/16 inches. The loopers are arranged so that
they maybe thrown out of position for convenience in threading.
An improved oiling system automatically oils all oP the principal
bearings of the machine. Speed up to 4000 R. P. M., according
to the material being stitched.
No.
•131446
68428
68429
1057C
50608R
139017
68350
Plate
20529
20529
20530
20530
20530
20530
Name
Arm, upper and lower (solid) with 948J,
15404, 68483, two 15405 and four
131022..................................................................
Arm Bottom Cover........................................................
" " " Gasket (cork)................................
" " " Screw............................................
" Hole Plug Screw for access to Crank
Connecting Rod (upper bearing)...........................
Arm Hole Plug Screw Washer.......................................
" Oil Cup, for oiling Arm Rock Shaft
Front Bearing........................................................