Using automatic needle threader, Empleo del enhebrador aguja – SINGER 117 FEATHERWEIGHT II User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING AUTOMATIC NEEDLE THREADER
Raise the needle to its highest position by rotating the hand wheel towards you.
1
. Pull down lever and hook thread to
2
. Guide thread into hooked end and pull
thread guide as illustrated. Continue to
it upward,
push lever until the hooked end passes
through the need^e eye.
3. Release the lever and needle will be
threaded automatically.
NOTE: For smooth threading it is
recommended to set the machine
at
straight
stitching
(middle
position) when using needle
threader.
EMPLEO DEL ENHEBRADOR AGUJA
Levantar la aguja a la posición más elevada girando el volante de la máquina hacia uated.
1
. Bajar la palanca y enhebrar enhebrar el
hilo en el guía hilo como indica la
Ilustración.
Bajar la palanca sujetando el extremo
del hilo.
2. Colocar el hilo en la horquilla de
enganche y estirarlo hacia arriba.
3. Soltar la palanca y la aguja será
enhebrada automáticamente.
Nota: Para conseguir un enhebrado
correcto con el enhebrador, se
recomienda poner el selector de la
máquina en puntada recta (posición
central).