SINGER 148-4 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ol'derinfi from tliis list, use ONLY tlie part NUMBER
in (lie i'IRST cokiiim.
'Pile number stamped on a Sewing Machine part is in every
case tlie number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stam])ed ou the parts, must be
used wlu'ii ordering the combination.
Each nuniher always indicates the SAMl'i PART in whatever
list it a|>pears, or for whatever machine.
I'he letters after some of the numbers indicate the style of
finish only, as follows:
.V—Hardened, I’olished, Nickel Plated and Buffed
B—Polisheil, Nickel I’lated and Buffed
('—Hardened Only
I)—Polished Only
E—Soft, Not Poli.shed
P—Harilencd and Polished
H -Blued
.1—Nickel Plated Only
K—Hardened and Nickel Plated
L—Bra.ss Plated
M —O.xidi/.ed
N—Japanned, Didl
P—Japaimed, Bright
R—Merlized
T—(\jp|)er Mated
T. j\.—Haidened, Polished, Copper and Nickel Plated
amt Buffed
T. B.—Copper and Nickel Plated and Polished
T. ,1.—Copper and Nickel Plated Oidy
T. K.—Hardene<l, Co[)i)ei'and Nickel Plated
T. .M.—Copper Plateil and O.xidized
T. L.—Cupper and Brass Plated
U—Zinc Plated
V—Silver Plated
t\'—Polished and Nickel Plated
'/.—Chi'oininm Platerl
Z. B.—Polished, Nickel Plated, Buffed and Chromium Plated
Z. ,1.—Nickel and Chromium Plated
These letters MUST BE USED when they appear in the list;
and AFTER the number as in the list.
In this series:
1 to bnlK) and htlOOI to 51500 are Screw Numbers
1501 to ISOU and 51501 to 51800 are Nut Numbers
IbOl l(j 2000 and 51801 to 52000 are Roller Numbers
20t)l to 5000(1 and 52001 ami upward are nuinbeis of
M:ichine Parts
'I’lie figures in the second column refer only to the idates,
illustrating the pails, and uie NOT TO BE USICD in ordcjing.
Parts marked with an asterisk (*) are furnished only when
repairs ;ire m:ide at factory.
When ordering |)aris which differ iis to Gauge (the distance
between sisuns) the Cange, as well as the Number must be
given iiu oi’tlcr.
. 7
LIST OF PARTS COMPLETE
FOR
bssa
MACHINE No. 148-4
FOR THREE LINE STITCHING ON HEAVY OVERALLS AND WORK
OF A SIMILAR NATURE. THREE NEEDLES, THREE
LOOPERS, DOUBLE CHAIN STITCH. GAUGES IN., IN.,
l-i IN., i, IN. AND 3% IN. BETWEEN EACH NEEDLE. DROP
FEED, FOOT LIFTER.
FORMERLY 148SV2 MACHINE
NO. 1'LA.TB N.XitK
*128196 --------Arm...................................................................
5B)i:i 9119 “ Back Cover.............................................
51914-------- Arm Back Cover complete. Nos. 1538i),
.502230, .51913, 54915, .54916 and two
14430........................................................
54915 9101 Arm Back Cover Latch with 911 b ..................
502231) 9117 “ “ “ “ Hinge Screw.. ..
911 k 9101 “ “ “ “ S c r e w S t u d
L538i) 9101
Tlumih Nut...............................................
54916 9101 Arm Back Cover Spring..................................
14431) 9101 “ “ “ “ Screw..................