SINGER W1563 - Manual (Page 19)

Many More Tlmo-Savlng Wonder Working
Available From Your Dealer At Modst Prices - - Here Are Some
Order them by genuine part numbers shown
17
Ruffier-Pleatar No. 1403
Just on one set of curtains for Üae kouse, you
will save Ixours and kotirs of time and nerve-
wracking tediousness by using your maciiine
and a Huffier. For pleating skirts and slip
covers; marking gift aprons, clxildren's clothes
with ruffled finishing touches; adding fullness
to dress bodices, are just a few of the many
uses for this versatile attachment. Also while
ruffling a trimming you can sew it on the main
fabric simultaneously. Despite its wide range
of practical applications it is amazingly simple
to use.
Zipper Sew-in and Cording Foot No. 1 873
Needed to sew in zippers by machine. Per­
mits stitching very close to the metal fastener
for smooth, secure results in a jiffy. Adjustable
for stitching on either side of foot - - left or right.
Also needed for Cording.
Darning Spring No. 4990
Of great assistance when Darning or Mono-
gramming
with Presser Foot removed from
machine--especially when using a hoop. It
justs slips over the needle and hooks onto
needle clamp.
Edgestitcher No. 76554
The fast, foolproof aind fine-finish way to sew
pipings, edgings amd lace insertions. Easy to
use--with a range of slots to guide the fabrics
and the operator.
Binding Appiler No. 74159
Another tremendous time-saver. This attach­
ment folds plain, flat bias binding from a roll;
also hand-cut bias binding, AND applies it to
edge of material at the same time. Also does
a fine job of applying standard sizes of folded
and two-tone (two different colors) bindings
simultaneously. Almost a must for making
children's garments fast and easily.
Hemmers for Four Popular Hem Widths
To go with the Narrow Hemmer which came
with your machine. Order by number accord­
ing to the width of hems wanted: ^4 inch-No.
76550; % inch-No. 76551; % inch-No. 76552;
vg inch-No. 76553.
Attachment Holder No. 82528 -
NECESSARY FOR ATTACHMENTS ABOVE
To use the Edgestitcher, Binding Applier, or
wider Hemmers on your machine you must
first install the Attachment Holder in place of
any Presser Foot.