Twin needle threading – SINGER W1588 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Twin Needle Threading
Thread in the same way as
normal
threading,
except
at
points (D, ® and ®.
At point
(2),
pass threads sepa-
ratly to right and left of tension
disc.
At guide ®, pass one of threads
to right guide and the other at
left guide.
At
point
thread
from
right
guide should be lead to right
needle eye, and from left guide
to left needle eye.
Leave ends of threads of about
1 5 cm (6").
When using twin needle sewing
be sure zigzag width control
setting between 0 and 2.5, and
needle postion control at( • ).
If zigzag width control above 2.5
and needle postion control at
(*
) or ( •)will cause needle
break.
-14-