Zigzag width control, Needle position control, Thread tension for ziqzaq stitch – SINGER W1588 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set machine as shown.
To prevent seam ends unravell
ing, set machine for straight
stitch and sew in reverse at
beginning and ending of seam.
5. ZIGZAG SEWING
Zigzag Width Control
Set control at required number.
Larger the number, wider the
stitch.
Set it at 0 for straight sewing.
Make sure needle is in upper
position when you set control.
Needle Position Control
Needle position can be changed
by
turning
needle
position
control.
When selecting position, make
sure needle is in upper position
to
avoid
tearing
material
or
bending needle.
Thread Tension for Ziqzaq
Stitch
Better-looking
zigzag
stitching
requires less upper tension than
straight stitching.
Loosen upper tension slightly.