Turkish stitch, Hemstitching, Overedge seam – SINGER 9134 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TURKISH STITCH
The Turkish Stitch can be used for appliqueing, joining patchwork or forming decorative
hems on bed and table linens.
HEMSTITCHING
•
Fold a double hem of desired width and
baste.
• Mark a guideline for hemstitching on
right side of fabric just above top of hem
edge.
RECOMMENDED SETTINGS
Stitch Selection: Turkish Stitch
Stitch Width:
D
Stitch Length:
3-1/2 to 4
Foot:
Special Purpose (J)
Needle Plate:
General Purpose (A)
Adjust balance, If necessary
Place work, right side up with hem
facing, right, under presser foot.
Lower presser foot and stitch along
guideline.
Be sure stitches on left side of line fall
over hem edge (into single thickness of
fabric) and stitches on right side fall
into double fold of hem.
With this stitch you can stitch and finish a seam in one step. It is also ideal for finishing
OVEREDGE SEAM
• Baste seams.
• Trim seam edge 1/4" (6mm) from basting
line.
RECOMMENDED SETTINGS
Stitch Selection:
Stretch Overedge
Stitch
Stitch Width:
Stitch Length:
Q
3-1/2 to 4
Foot:
Special Purpose (J)
Needle Plate:
General Purpose (A)
Adjust balance, if necessary
Position trimmed seam under presser
foot, as shown.
Stitch along basting line.
Straight stitches should fall on basting
line; zig-zag stitches should fall over
seam edge.
Remove basting stitches and press.
31