SINGER W1409 (New) Instruction Manual User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REMOVING BOBBIN CASE AND BOBBIN
1.Raise needle to its highest
position and open the
shuttle race cover.
2.
Open hinged latch of bobbin
case and pull bobbin case
out of machine.
3.Release the latch and bob
bin will fall out easily.
INSERTING BOBBIN INTO BOBBIN CASE
I.Pull off 5cm of thread from
bobbin and insert it into
bobbin case as shown.
spring
2.Guide the end of thread into
slot.
3.Pull into slot and under
tension spring and draw
out about 10cm of thread.
7 -
Advertising
This manual is related to the following products: