Regulating the presser foot pressure – SINGER W1409 (New) Instruction Manual User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

REGULATING THE PRESSER FOOT PRESSURE

1. Push aown inner pm (A) to increase pressure.

(Light to medium fabrics!

2. Push down outer ring to release pressure. (Heavy

fabrics)

3. Insufficient pressure may cause poor feeding,

skipped stitches, or difficulty m guiding the faoric.

4. No pressure adjustment is required wnen darn­

ing or sewing embroidery.

DROP FEED

Note; Darning plate can be purchased seoarateiy.

There are a few times when you want to control tne feeding of fabric by your­

self.

Raise needle bar to its highest position and raise presser foot, place aarnmg plate

over needle plate aligning two pins of darning plate with holes of needle piate

You may then determine the movement of the fabric by yourself See page 19

for button sewing application - 13 —

Advertising
This manual is related to the following products: