Embroidering with a hoop, Making buttonholes – SINGER W2134 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EMBROIDERING WITH A HOOP
It is easy to follow a stamped design or to work
free
hand
when
embroidering
or
monogramming.
(See
Fig.
26).
Release
the
pressure
from
the
foot
by
pressing
down
the
snap
lock
on
the
automatic
darner.
Turn
the
drop
feed
knob
to
"DARN"
posi
tion.
Stretch
the
fabric
in
an
embroidery
hoop,
removing
the
presser
foot
presser
bar
lifter,
hoop
slowly
with
both
hands
path of the needle.
i
__£
Fig. 26
snd. plac© unci©r th.© ne©cil© aft©r
Set the stitch width at the size you prefer and lower the
Then operate machine at a rather high speed while moving the
Work carefully and be sure to keep lingers out of the
MAKING BUTTONHOLES
First, mark the begimiing and end of the buttonhole on fabric with a basting line or
tarlors
chalk.
Make
one
on
scrap
fabric
(following
directions
below)
to
be
sure
machine adjustments are correct.
1.
Replace presser foot with buttonhole foot which is grooved deeply underneath to
.....
23