Setting the stitch length, Stitch length chart (approximate) – SINGER W2134 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Be sure to set the stitch width at O,
or the
needle will break in striking the foot or plate.
Push the zigzag lever 17, Fig. 13) all the way to the
left so that pointer is over
0
in stitch width window.
Set both locks,
6
, as far to the left as possible.
To
move
locks,
pull
knobs
slightly
and
slide,
then
release.
SETTING THE STITCH LENGTH
The
length
of
the
stitch
is
regulated
by
the
dial
A
shown
in Fig. 14. Near 0 is the shortest stitch and
6
is the longest.
Turn the dial to the left to lengthen and to the right to shorten
the stitch.
STITCH LENGTH CHART (Approximate)
Fig. 13
Figures on dial
0
1
2
3
4
5
6
Number of
stitches per inch
No feeding
36
2 0
1 2
9
7
5
13