SINGER W310 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If your machine skips stitches only on certain fabrics,
try all of the procedures on the previous page before
calling a repair-man.
Check the needle plate area, if there are scratches and
marks around the needle hole opening, your machine is
not being cleaned properly. Always remove the needle
plate and clean the feed dogs periodically. Improper and
lack of cleaning will cause an accumulation of lint which
hampers the feeding mechanism, this in turn will cause
the operator to impatiently pull or push the cloth
causing the needle to bend and strike the plate, foot or
hook,
causing
a
slip
in
the
timing
mechanism.
Continuous
striking
will
cause
defects
making
it
necessary to call a serviceman.
'ify