SINGER 147-29 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
111 ordering from this list, use ONLY the part NUMRER
in tlie FIRST eolninn.
'rhe number stamped on a Sewing Maidiine part is in every
case the nuinli(ti- of the single part only.
livery eombination of parts sent out as such has its specific
nundier, whndi, although not stamped on the jiarts, must be
used when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A—Hardened, Polished, Nickel Plated and Buffed
B—Polished, Nickel Plated and Buffed
C—1 lardened Only
D—Polished Only
E—Soft, Not Polished
F—Hardened and Polished
11 ^Blued
,1—.Nickel Plated Only
K—Hardened and Nickel Plated
L—Brass Plated
M -Alxidized
N—,Ia|)anned, Dull
P—Japan,ned, Brigiit
R—Merlized
T —Coiiper Plated
'r. A.—Hardened, Poli.shed, Copper and Nickel Plated
and Buffed
'I'. B.—Co|)per ami Nickel Plated and Polished
T. J.—Copper and Nickel Plated Only
'I'. Iv.—Hardened, Co])|)er and Nickel Plated
'1'. lU.—Copjjer Plated and Oxidized
T. L.—Copper ajid Brass Plated
U -Zinc Plated
V—Silver Plated
\V—Polished and Nickel Plated
Z—Chromium Plated
Z. B.—Polished, Nickel Plated, Buffed and Chromium Plated
Z. J.—Nickel and Chromium Plated
'I'hese letters MUST BE USED when they appear in the list;
and AFTER the number as in the list.
In this series:
1 to 1500 and 500f)l to 5150f) are Screw Numbers
1501 to ISttO and 51501 to 51800 are Nut Numbers
1801 to 2000 and 51801 to 52000 are Roller Numbers
2001 to 50000 and 52001 and ujiward are numbers of
Machine Parts
The figures in the second column refer only to the plates,
illustrating the jiarts, and are NO'!' TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repidrs are made at factory.
When ordering parts which differ as to Gauge (the distance
between seams) the Gauge, as well as the Number must be
given on order.
LIST OF PARTS COMPLETE
FOR
E«03
MACHINE No. 147-29
FOR TWO-LINE STITCHING IN FABRICS. TWO NEEDLES,
TWO LOOPERS, FOR TWO THREAD CHAIN STITCH.
FOOT LIFTER. GAUGES FROM ^ INCH TO % INCH.
THE MACHINE IS FITTED WITH UPPER AND UNDER
CORRUGATED FEED ROLLS ATTACHED TO THE MACHINE
TO ASSIST IN CARRYING THE MATERIAL FROM THE
MACHINE AFTER BEING STITCHED. THE UNDER ROLL
RECEIVES ITS MOTION FROM AN ADJUSTABLE ECCENTRIC
ON THE ROTARY SHAFT, BEING INDEPENDENTLY AD­
JUSTABLE TO BRING THE MOTION OF THE FEED ROLLS
IN UNISON WITH THE FEEDING MECHANISM. SPEED 3400
NO. I'l.ATB
■54449 —
42366 8901
56006 8901
56003 9000
52045 8901
Arm, upper and lower (solid) with 948n
and 54034....................................................
Arm Oil Pad (braided cotton) for oiling
Arm Rock Shaft Front Bearing...................
Arm Oil Pad (braided cotton) for oiling
Arm Rock Shaft Intermediate Bearing
Arm Oil Tube with 52045 for oiling 54326
“ “ “ Packing (braided cotton)...