Applications, 7v.-j^-7v-.a v_.j^ v v..-a.-.a..a v, Blindstitch hems – SINGER 7106 User Manual

Page 31: Blindstitch

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

applications

- V ' V ” V V V — \ r - - V V V V ' ' V V V V V " V V

!>

BLINDSTITCH

The blindstitch has many practical and functional uses. Its most common use

provides a durable hem finish. However, the creative ways that one might apply

this stitch are unending.

7V.-J^-7V-.A.--7V_.J^..7V..7V..-A.-.A..A...7V..

Blindstitch Hems

<:

I

I

<:

I

I

• Pattern Group Selector:

E

• Needle Position:

• Stitch Width:

• Stitch Length:

1

to

2.5

• General Purpose Needle Plate

• General Purpose Foot

• Blindstitch Hem Guide

1. Raise foot, loosen screw, and slip blindstitch

hem guide from the front between the screw
and the shank of the foot. Make sure the
underside of the guide clears the slide plate
and the front of the foot. Tighten screw with

coin.

2. Prepare hem in the usual way. It is advisable

to baste the hem. Place the basting at least
1.3 cm (V

2

inch) below the edge of the hem

allowance to avoid catching the flange of
the guide as you stitch.

3. With the wrong side of the work uppermost,

turn the hem under, creating a soft fold
from the top edge of the hem.

4. Position the hem under the foot with the soft

fold resting against the wall of the guide.

Make sure the flange of the guide is be­

tween the soft fold and top of hem, as shown.

5. Lower the foot and stitch so that the straight

stitches fall on the hem allowance and the
zig-zag stitches pierce the soft fold of the
work. Adjust stitch width if necessary. While
stitching, guide the hem edge in a straight

line and feed the soft fold evenly against

the wall of the guide.

29

Advertising