Chapter 7. twin-needle stitching, Procedure, Chapter 7 – SINGER 7106 User Manual
Page 37: Twin-needle stitching
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 7. Twin-Needle Stitching
The twin-needle simultaneously produces two
parallel, closely spaced lines of pattern stitch
ing. You can stitch with either one or two col
ours of thread.
• Pattern Group Selector; Stitch desired
• Needle Position:
J«
•
X
:
A
only
• Stitch Width:
• ^
^
only^
• Stitch Length; . 5 - 4 to suit fabric
• General Purpose Needle Plate
• General Purpose Foot or Special Purpose Foot
Procedure
• Insert twin-needle.
• Thread as for single-needle stitching,
ex
cept
pass thread between
centre
and
back
tension discs
A,
and through
right eye
of
needle.
•
Attach detachable spool pin, with felt, in
hole on top cover.
• Place spool of thread on detachable spool
pin and thread machine in usual way, except
pass thread from second spool between
centre
and
front
tension discs
B,
as shown.
•
Thread through remaining points, making
certain to
omit the thread guide above the
needle
and pass thread through
left
eye of
needle.
Long Grooves
Toward You
A CAUTION: Do not use a stitch width greater than what is recommended. A wider stitch will result In needle breakage.
35