SINGER 114-34 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use CWLY the port NUMBER In the
FIRST column.
The number etanped on a Sewing Machine Fart la In every caae
the number of the single part only.
Every combination of parta sent out as such has Its specific
number, which, although not stamped on the parts, must be used
when ordering the combination.
Each nunt>er always Indicates the 3A№ PART In whatever list
It appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A-Hardened, Polished, Nickel Plated and Buffed
A.A-Buffed and Chromium Plated
A.B-Hardened, Polished, Buffed and Chromium Plated
A.C'Brown Baking Enamel Finish
A.D-Qray Baking Enamel Finish
A.E-Kardened, Bright Rumbled and Nickel Plated
A.F-Hardened, Bright Rumbled, Nickel Plated, Brlÿit Runhled and
Chromium Plated
B-Pollshed, Nickel Plated and Buffed
C-Hardened Only
C.R-Uardeued and Merllzed
D-Pollshed Only
E-Soft, Not Polished
F-Hardened and Polished
F.J-Hardened, Polished and Nickel Plated
Q-Brlght Rumbled and Nickel Plated
B-Blued
J-Nlckel Plated Only
K-Hardened and Nickel Plated
L-Braes Plated
M-Oxldlzed
N-Japanned, Dull
P-Japanned, Bright
P.P-Urlnkle Finish
R-Merllzed
S-Cadmlun Plated
T-Copper Plated
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed
T.B-Copper and Nickel Plated and Polished
T.J-Copper and Nickel Plated Only
T.K-Hardened, Copper and Nickel Plated
T.L-Copper and Brass Plated
T.M-Copper Plated and Cttldlzed
U-Zloc Plated
V-3Uver Plated
W-Pollshed and Nickel Plated
X-Black Qzlde, for Iron and Steel
l.C-Hardened and Black Oxide, for Iron or Steel
T-Black Nickel Plated Only
Z-ChronliiB Plated
Z.A-Hardened,Polished,Nickel Plated,Buffed and Chromium Plated
Z.B-Pollshed, Nickel Plated, Buffed and ChroraliBO Plated
Z.C-Hardened and Chromium Plated
Z.D-Pollshed and Chromium Plated
Z.O-Bright Rumbled, Nickel Plated, Brl^t Rumbled and Chromium Plated
Z.J-Nlckel and Chromium Plated
Z.T-Copper and Chromium Plated
These letters MUST EE USED when they appear In the list; and
AFTER the nujober as In the Hat.
In this series:
1 to 1500, 50001 to 51500 and 140001 to 142000
are Screw Nwbers
1501 to 1800 and 51501 to 51600 are Nut Niaabers
1801 to 2000 and 61801 to 52000 are Roller Numbers
2001 to 50000 and 52001 to 140000 and 142001 to
190000 are Sewing Machine Parts, 190001 and upward
are numbers of Electrical Parts.
The figures in the second colunn refer only to the plates.
Illustrating the parts, and are NOT TO BE USED In ordering.
Parts marked with an asterisk (•) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
/MACHINE No. 114-32
For Sewing Two or Four Hole Flat Buttons, from 10 to 50
ligne. Makes two parallel bars in four hole buttons, 14 stitches,
including cross and fastening stitches. Thread cutter. Clamp
vibrates ACROSS the cylinder. Will hold button and material
up to Yie inch thick and can be adjusted for buttons with holes
%4 inch to ^16 inch apart. Speed 1500 R. P. M.
No.
*124845
Plate
Arra.
*124625 U
16532 23178 Arm
4448 23178
■
56015 23178 N
136594 M
880E 23178 Arm
59702 23178
«
*136541
«
17703 23178 Arm
Name
each 164E and 15405.
Oil Tube, for Intermediate bearing..
" “ " oiling 59705 and 59706
• • * * Needle Bar Con­
necting Link (upper) Bearing...................................
Shaft (horizontal).
5970e with 59774,
62235 and 68717.