Maytag T1 - Manual (Page 17)

Setting the Controls for Self Clean
NOTE: These instructions cover automatic lock and manual lock models.
1. Close oven door.
2. Move door lock lever right to the locked position
(select models).
3. Press CLEAN pad.
• “— : — ” or 3:00 will light in display.
• CLEAN will flash in display. On select models LOCK
indicator word will appear.
• If door is not closed or locked, beeps will sound and
“door” will flash in display.
CLEAN
! m
_/./ // /
_L/_//_/
4. Press A or ▼ pad to select clean time or change clean time.
• Oven is preset to clean for 3 hours. Or,
• Select 2 hours for light soil up to 4 hours for heavy soil.
UJ h >
I.UU
5. IF YOU WISH TO DELAY THE START OF
CLEANING (if not, skip to #6):
a. Press STOP TIME pad.
b. Press A or ▼ pad to select the time of day you wish
the oven to turn off.
c. Press CLOCK pad and time of day will reappear in
display.
d. DELAY CLEAN will remain in display to show the
oven is set for delayed clean operation.
STOP
TIME then
TIMER
M
CLOCK
l l I , 1 I I I
lU ,uu
C J~~in
-I .uu
6. When the oven turns on the clean symbol and the indicator
word LOCK will light in the display.
• The LOCK indicator word on models with a manual door lock
will appear when the oven reaches 400°F. (select models)
• Door cannot be opened when LOCK is displayed.
CLEAN SYMBOL
7. About one hour after the clean cycle ends, the LOCK indicator
word will turn off. The oven door can be opened.
(Select models - move door lock lever to the left to unlock.)
i n J I I I
lU .UU
TO CANCEL CLEAN CYCLE:
1. Press CANCEL pad.
2. If LOCK is NOT displayed, open oven door.
If LOCK is displayed, allow oven to cool about one hour
then open oven door.
7/”/ . n n
iU .UU
LOCK IS STILL ENGAGED.
DOOR CANNOT BE
OPENED UNTIL LOCK IS
NO LONGER DISPLAYED.
16