SINGER 2118 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sewing a Seam
Most fabrics can be placed under the foot by
raising the presser foot lifter (1) to its normal
“up” position (2) where it locks in place. When
using bulky fabric, multiple fabric layers, or an
embroidery hoop, raise the lifter to the highrise
position (3), thus increasing the space between
the foot and the needle plate.
sk Lower presser foot lifter all the way down
and the machine is ready to sew.
5k To keep seams straight, use one of the guide
lines on the needle plate.
5k The most commonly used line (1) for a 5/8
inch (1.8 cm.) seam allowance is extended onto
the slide plate.
5k To start a seam, place fabric under presser
foot so needle will first penetrate 1/2 inch (1.2
cm) from starting edge of fabric. Align the right
edge with one of the guidelines on the throat
plate. Lower the presser foot.
H« Reverse-stitch using reverse button to the edge
of fabric then release button for forward
stitching.
When seam is completed, hold in reverse button
and stitch for 3-4 stitches to lock seam.
5k Raise needle and presser foot to remove
fabric from machine. Cut thread using thread
cutter on face plate.
20