Iî iaifînne r – SINGER 2118 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

iî iaifînNe R

To really enjoy sewing, get to know the machine well. This chapter will be valuable in

doing just that.

Cohnectiitg the h/lachine

Connecting the ControUer

NOTE: Before plugging in the machine, be sure

the electrical information on the label (1) below

the handwheel agrees with the local electrical

supply.
Push plug (2) into the receptacle (3) at the right

end of the machine. Then, connect plug (4) to

an electrical outlet.

Running the Machine
To turn on machine and sewing light, press rear

portion of power switch (5). To turn off machine

and light, press front portion “0” of power

switch.
To run the machine and control speed, press the

speed controller (6) with foot. The harder it is

pressed, the faster the machine will sew. To stop

machine, remove foot from the controller.

NOTE: Do not operate machine without fabric

under the presser foot as this may

damage the feed and the presser foot.

Advertising
This manual is related to the following products: