E.')l|7, E64№ iffa. 12 – SINGER 99-13 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

To Adjust the Ruffler for Group

Plaiting and Gathering

u

naiting ana Vjatnering

Tlu! riililer ßim l)c adjusted for group ]>!ail.iiig hy

lifting the adjusLiiig luvor (10, Tig. and i>lac.ing

E.')l|7¡

Pro. 4t

it on top of tile projerlioti (0, Tig. 41) at the point

indicated hy the star on the ailjusting lever. 'I’liis

shouUl he done at the ])oinl.s where you wish to

make the space hetweeii the plails. The ruifler will
then .slop and plain stitching will he made. \\ hen

the desired space has been made, adjust the lever

(10) so that the projection (9) enlers the slot marked

Jly

alternalely

inakiiijj

groups

of

plaits

and

plain spaces, as shown in ]''ig. 41, very attractive

Work

can he proiluced.

To Oil the Ruffler

Occasionally apply a drop of oil to the working

parts of the rulller at each of the places indicated hy

arrows in Tig. 41. After oiling, operate the rufller

on a waste piece of material to iirevent the oil from
soiling the work. If the rulller does not plait evenly,
a drop of oil may remedy the trouble.

45

To Use the Cloth Guide

To ensure accurate guiding of the work w'lien

sewing close to the edge of the goods, the cloth

E64№

Iffa. 12

guide

(V,

h’ig.

42)

should

be

used.

TasLen

the

cloth guide to the bed of the machine by means

of the clami>ing thumb screw (W, Tig. 42), inserting

the thumb screw inl.o either one of the two screw

holes in the bed of the machine. The cloth guide

can be adjusted to bring the edge of the goods

as close to the lino of stitching as desired.

Advertising