Sewing tips, Shaping darts in interfacings – SINGER W312 Old User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWING TIPS
When
a
dainty
hair
Sine
finish
is
particutarty desirable for the inside seams
of sheer collars, facings, and yokes, seam
allowance that would ordinarily show
through is eiiminated by following the
seam outline with a narrow zigzag stitch.
Trim seam allowance close to line of
stitching. Turn and press.
Sstector:
Lsngth; 1 /2—1
Width; 1-2
Feed Dog; UP
Pressure; Full
Foot; All Purpose
SHAPING DARTS IN
INTERFACINGS
Cut interfacing down center between dart
lines. Overlap cut edges, matching dart
lines. Zigzag stitch along marking line
from point to wide end of dart. Trim
both raw edges close to stitching.
Selector:
Length; 1/2-1
Width; 1
Feed Dog: UP
Pressure; Puli
Foot; Ail Purpose
30