SINGER W1866 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
WINDING THE BOBBIN
1- Release stop motion kn
2. Thread as shown.
3.
Place bobbin onto spin'
and hand-wind thread or
bobbin in an anti-clockw
direction for 5 or 6 tun
(When bobbin is filled re-tight
stop motion knob)
/Bobbin”
winder
spindle
4. Push bobbin winder spindle
against stopper, in direction
of arrow, and depress foot
pedal.
5. When bobbin winding is com
pleted return spindle to its
original position.
Note:
If the bobbin winding should be
uneven fit is factory set) the
thread guide can be raised or
lowered to achieve the correct
winding.
Remove the top cover and adjust
with a suitable tool.
Advertising