SINGER PSW 1.10-WORKBOOK - Manual (Page 48)

Professional Sew-Ware
Autotracing
7. Select the shade of the color by moving the mouse pointer up or down the
shade bar. Notice the color will change in the right hand rectangular box.
8. Click on OK when the desired color is selected.
9. Remember to always follow steps 1 through 8 for each color change.
Auto Trace with Satin Stitch using the Outline Satin
1. In the top tool bar select the Current Method icon
2. A second tool bar will appear.
3. Click the left mouse once on the far right icon.
4. Place the mouse cross point on the inside of the segment you wish to outline.
5. Click the right mouse. A tone in the computer will acknowledge the auto
trace outline stitch being activated.
6. Hold down Ctrl on the keyboard and click the left mouse. The outline Satin
Stitch fills in around the segment you had chosen.
Changing Direction of Stitches
1. Once the two flower petals have been autotraced in the flower design, click
the left mouse once on the ‘Edit Outline" icon on the top tool bar. 3'^ icon from
the right. This function is used to change the stitch type/design parameter in
a block. The first reference points around the segment of the design last
autotraced will be shown. Click the left mouse button once on the desired
segment of the design to change the stitch direction.
2. Click the left mouse once on the “outline Mode:" icon found on the top tool
bar, 4^^ icon from the right. This now changes to a new toolbar on the top
screen.
3. To move the stitch inclination lines, click on the left mouse button once on the
“Select Edit Mode", 5‘^ icon from the right on the top toolbar. Each time the
left mouse is clicked on the icon, three different functions will be highlighted;
46