SINGER PSW 1.10-WORKBOOK - Manual (Page 57)

Professional Sew-Ware
Editing - Changing the Stitch Inclination of Method 2
The Stitch inclination of a block that was digitized using Method 2 - Complex Fill can be
changed.
1. Load digitized design onto PSW^ screen.
2. Zoom into block to be edited.
3. Choose Edit:Edit Outline
4. Click the left mouse once on the block to be changed.
5. On the top horizontal tool bar click on the Outline Mode icon.
6. A new horizontal tool bar will appear at the top of the screen. Click on the Select
Edit Mode icon.
7. There are three options in this function. The first option is Edit the Inclination
{This information is in the lower left prompt line.)
Note: The inclination option is not an option for the running stitch or satin stitch.
8. If you click the mouse again (or press the spacebar) the second option is Edit the
First and last point.
9. If you click the mouse a third time (or press the spacebar) the option is Edit the
Outline. Click the mouse once again to return to Edit the Inclination.
10. A colored line with a dashed box will be shown in the block that represents the stitch
inclination line. Click the left mouse once on either end of the colored line. The end
of the line will now be “attached” to the mouse pointer and can be moved to a new
inclination. Click the left mouse again to place the line at the new inclination.
11. Click the right mouse once to set the new stitch inclination,
55