SINGER 114-31 - Manual (Page 10)

20 THREAD UNWINDER
No.
225360
Plate Name
------- Thread Unvjlnder complete, Nos. 150203,
201696J, 202490,2225259,22.5324,225326,
225360,2225391 and three wood screws
7/8 in. No. 12.......................................................
Tliread Cone (wood) for large cones.........................
" '' Holder, for Inverted cones..
27739 and 22.5390 are used with, but not
Included In 2^:5260.
60773 23160 Thread Unwinder with Thread Guide com­
plete, Nos. 60772 and 225260............................
27739
225390
23160
23160
Note: Nos.
Genuine Singer Needles should be used
in Singer Machines.
These Needles and their Containers
are marked with the
Company's Trade Mark "SIMANCO." I
Needles in Containers marked
“For Singer Machines”
are not Singer made needles.
21
NUMERICAL LIST OF PARTS
No. Plate Name
99K 23166 Thread Nipper (lower) Connection Exten­
sion Hinge Screw.................................................
134E 23157 Cylinder Base Plate Screw for 124959....
153E 23159 Table Belt Guide Pulley Shaft Set Screw
for 17892..............................................................
160J 23176 Feed Regulator Bracket Cap Screw for
12^1651................................................................
161E 23159 Treadle Pitman Rod Clamp Screw for 17879
164J 23164 Face Plate Screw..........................................................
164E 23166 Presser Bar Lifting Lever Bracket Screw
for 62295..............................................................
168E 23159 Table Belt Guide Set Screw for 39218....
175E 23160 TTiread Unwinder Thread Guide Bracket Set
Screw for 41635...................................................
176J 23153 Brake Arm Releasing Lever Screw for
124770..................................................................
178J 23157 Machine Supporting Bracket (lower) Screw
for 124966............................................................
184E 23161 Belt Cover Bracket Screw Stud for 59795.
185J 23177 Clamp Guide Bracket Screw for 124922.,..
190J 23161 Arm Side Cover Screw................................................
190J 23164 Clamp Lifter Screw......................................................
190J 23175 Feed Plate Carrier Bar Guide Screw.........................
1901 23161 Looper Driving Shaft Gear Cover Screw...
1901 23163 Tripping Point Screw for 124648...............................
19 U 23158 Eye and Finger Guard Supporting Bracket
Screw for 121627.................................................
196C 23166 Presser Bar Collar Set Screw for 124769 .
202J 23166 Thread Pull-off Screw.................................................
206J 23166 " Nipper (lower) Connection Extension
Screw....................................................................
206D 23176 Throat Plate Needle Guard Screw for
124877..................................................................
207J 23177 Clamp Cuff Guide Block Screw for 124922.
208J 23177 " Hinge Bracket Screw for 124922....
208J 23158 Eye and Finger Guard Face Plate Thfead
Nipper Disc Cover Screw for 136587..
208J 23164 Face Plate Thread Nipper Disc Cover
Screw for 59712...................................................
208D 23176 Loop Guard Screw.......................................................
208E 23160 Thread Unwinder Thread Guide Rod Screw
for 225324............................................................
217J 23161 Belt Cover Screw.........................................................
223F 9596 Knife Bar Driving Lever Lock Stud Screw
for 59734..............................................................
228J 23177 Clamp Spring Screw for 124922.................................