SINGER 114-31 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the part NUMBER In the
FIRST column.
The number stamped on a Sewing Machine Part la In every case
the number of the single part only.
Every combination oi parts sent out as such has Its speclilc
number, which, although not stamped on the parts, must be used
when ordering the combination.
Each number always Indicates the ЗАМЕ PART in whatever list
it appears, or for whatever machine.
The letters after some of the numbers Indicate the style of
finish only, as follows;
A-Hardened, Polished, Nickel Plated and Buffed
A.A-Buffed and Chromium Plated
A.B-Kardened, Polished, Buffed and Chroralum Plated
A.C-Brown Baking Enamel Finish
A.D-Oray Baking Enamel Finish
A.E-Hardened, Bright Rumbled and Nickel Plated
A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and
Chromium Plated
B-Pollshed, Nickel Plated and Buffed
C-Hardened Only
C.R-Hardened and Merllzed
D-Pollshed Only
E-Soft, Not Polished
F-Hardened and Polished
F.J-Hardened, Polished and Nickel Plated
Q-Brlght Rumbled and Nickel Plated
ff-Biued
J-Nlckel Plated Only
K-Hardened and Nickel Plated
L-Bras3 Plated
M-Oxldlzed
N-Japanned, Dull
P-Japanned, Bright
P.P-Wrlnkle Finish
R-Merllzed
S-Cadmlum Plated
T-Copper Plated
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed
T.B-Copper and Nickel Plated and Polished
T.J-Copper and Nickel Plated Only
T.K-Hardened, Copper and Nickel Plated
T.L-Copper and Brass Plated
T.M-Copper Plated and Oxidized
U-Zinc Plated
V-311ver Plated
W-Pollshed and Nickel Plated
X-Black Oxide, for Iron and Steel
X.C-Hardoned anu Black Oxide, for Iron or Steel
Y-Black Nickel Plated Only
Z-Chrumlum Plated
Z.A-Hardened,Polished,Nickel Plated,Buffed and Chromium Plated
Z.B-PollBhed, Nickel Plated, Buffed and Chromium Plated
Z.C-Hardened and Chromium Plated
Z.D-Pollshed and Chromium Plated
Z.Q-Bright Bumbled, Nickel Plated, Bright Bumbled and Chromium Plated
Z.J-Nlckel and Chromium Plated
Z.T-Copper and Chromium Plated
"hese letters MUST Ж USED when they appear In the list; and
AFTER the number as in the list.
In this aeries;
1 to 1500, 50001 to 51500 and 140001 to 142000
are Screw Numbei's
1501 to 1800 and 51501 to 51800 are Nut ШвпЬегз
1001 to 2000 and 51801 to 52000 are Roller Numbers
2001 to 50000 and 52001 to 140000 and 142001 to
190000 are Sewing Machine Parts, 190001 and upward
are numbers of Electrical Parts.
The rigui-es in the second column refer only to the plates,
Illustrating the parts, and are NOT TO BE USED In ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 114-31
For Tacking Paper Tickets on Clothing to Distinguish Lot,
Color, Size, etc., while in process of Manufacture, and tacking
cuffs of trousers. Tack inch long, 7 stitches, including
fastening stitch. Thread cutter. Speed 1000 R. P. M.
No.
*124845
Plate
Arm
Name
*62295
»1 •124845 with 15404,124793 and two each
164E and 15405...................................................
16532 23161 Arm Dowel Pin.............................................................
4448 23161 " Oil Tube, for Intermediate bearing..
56015 23161
H
....................... oiling 59705 and 59706
880E 23161
M
Screw....................................................................
59702 23161
n
Shaft (horizontal)................................................
17703 23161
li
" " Bushing (back)...
50333C 23161
.1 <1 1. a
Justing Screw......................................................
1520J 23161 Arm Shaft (horizontal) Bushing (back)
Adjusting Screw Nut..........................................
59703 23161 Arm Shaft (horizontal) Gear with two
1036C ..................................................................