Removing bobbin case and bobbin, Inserting bobbin into bobbin case – SINGER W213 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REMOVING BOBBIN CASE AND BOBBIN
1.Raise needle to Its highest
position
and
open
the
shuttle race cover.
2.0pen hinged latch of bobbin
case and puH bobbin case
out of machine.
a.Release the latch and bob
bin will fail out easily.
INSERTING BOBBIN INTO BOBBIN CASE
1 .Puli off 5cm of thread from
bobbin
and
insert
it
into
bobbin case as shown.
spring
slot.
3-Pull into slot and under
tension spring and draw
out about 10cm of thread.
- 7
Advertising
This manual is related to the following products: