Changing sewing directions, Drawing up bobbin thread – SINGER W213 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DRAWING UP BOBBIN THREAD
1. Hold upper thread with left
hand, turn the hand wheel
slowly towards you until the
needle
qoes
down
and
comes up. Then stop ttte
hand
wheel
when
the
takeup lever is at its highest
position. Lightly draw up
the upper tijread and the
lower thread wl» be brought
up in a loop.
2. Pull out both threads and
place them together under
presser foot to the rear of
machine.
3. Place fabric under presser
foot from the front, lower
presser foot.
(see page 16}
CHANGING SEWING DIRECTIONS
1 .Lower needle down into
fabric and raise presser foot,
pivot the fabric around the
needle to change direction
as desired.
2. Lower presser foot and start
to sew.
- 1 0 -