SINGER W1044 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lower the feed by turning drop feed knob to "DOWN" thus permitting the work to be moved by hand
in any direction desired. Also remove presser foot and raise foot lifting lever and your machine is ready for
embroidering and darning. Both will be done most successfully when material is stretched on an embroidery
hoop.
Hold the hoop closely on the machine base with both hands and press the material with index finger on
the vicinity of the needle. This will help in holding down the material and will prevent the machine from
skipping stitches. Manipulate work carefully and be sure to keep finger out of path of needle to avoid injury.
Adjust thread tensions for best appearance of embroidery work and slightly decrease the upper thread
tension to avoid the lower thread from being pulled up.
19. DARNING EMBROIDERING AND MONOGRAMMING
1 7
^