Troy-Bilt 15009 - Manual (Page 50)

ECONO-HORSE TILLER SPECIFICATIONS
ENGINE
Type—
Tecumseh; four-cycle, single-cylinder, air-cooled,
horizontal crankshaft, overhead valve, primer-
button choke, solid state electronic ignition.
Horsepower—
6
Fuel Tank Capacity—
1 gallon.
Fuel Requirements—
Unleaded Regular or Premium Grade gasoline.
Engine Oil—
API Service SF, SG, SH or SH/CD.
SAE30W oil above 32°F. SAE5W30 oil below
32°F. (SAE10W is an acceptable substitute.)
(Do not use 10W40 oil.)
Engine Oil Capacity
21 ounces; however, always use the engine
dipstick to verify that the level of the engine oil
is correct.
Spark Plug Type
Champion RN4C only.
A resistor plug must be used for replacement.
Spark Plug Gap
.030 inch.
TILLER
Height—
Without handlebars:
Recoil Start Model................................ 24-3/4
With handlebars in low position............. 38-1/4"
With handlebars in high position..............
46-1/2"
Length—
With handlebars in low position................ 64-1/2"
Without handlebars..................................46-7/8"
Width
Hood width................................................ 20-1/8"
Tilling width..................................................... 18"
Width at top of handlebars............................ 20"
Weight
Recoil start model.................................. 236-lbs.
Wheel and Tire Size
5.00
X
6"; 15-to-20 psi (pounds / sq. inch)
Transmission
Gear oil capacity: 3% pints (52-to-54 ozs.)
Small Top-Offs: SAE 140, SAE 85W-140, or
SAE 80W-90 weight gear oil with an API rating
of either GL-4 or GL-5.
Full Replacement: SAE 140 or SAE 85W-140
weight gear oil with an API rating of GL-4 only.
PONY TILLER SPECIFICATIONS
ENGINE TILLER
Type— Height—
Briggs & Stratton; four-cycle, single-cylinder. Without handiebars:
air-cooied, horizontal crankshaft, manual Recoil Start Model........................................24
choke, solid state electronic ignition. With handlebars in low position................ 38-1/4"
Horsepower — With handlebars in high position...................48"
5 Length—
Fuel Tank Capacity — With handlebars in low position.................... 62"
3 quarts. Without handlebars......................................... 47"
Fuel Requirements— Width
Unleaded or leaded Regular Grade gasoline. Hood width................................................... 1 6-1/2"
Engine Oil— Tilling width......................................................16"
API Service SE, SF, or SG. Width at top of handlebars............................. 20"
40°F to 100°F: SAE 30W oil. Weight
0°F to 40°F: SAE 5W30 oil or SAE 10W30 oil. Electric start model................................. 185-lbs.
-20°F to 40°F: Synthetic 5W-20 or 5W-30 oii. Recoil start model....................................165-lbs.
Engine Oil Capacity Wheel and Tire Size
20 ounces; however, always fill to the top of 4.10 x 6"; 15-to-20 psi (pounds / sq. inch)
the oil fill tube. Transmission
Spark Plug Type Gear oil capacity: 3% pints (52-to-54 ozs.)
Champion J-8C (or equivalent). Canadian Small Top-Offs: SAE 140, SAE 85W-140, or
models: RJ-17LM. SAE 80W-90 weight gear oil with an API rating
Spark Plug Gap either GL-4 or GL-5.
030 inch Replacement: SAE 140 or SAE 85W-140
weight gear oil with an API rating of GL-4 only.
48