Part identification chart – NordicTrack STRENGTH ADJUSTABLE BENCH NTB12920 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw
ing is the key number of the part, from the PART LIST on page 10 of this manual. Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M6 Washer (26)
M6
X
16mm Screw (18)
Ml 0
X
63mm Button Head Bolt (21)
M10 Nylon Locknut (23)
M6
X
68mm Screw (27)
M10
X
75mm Button Head Bolt (19)
Ml 2
X
87mm Button Head Bolt (17)
Ml2 Nylon Lockut (24)
M10
X
115mm Carriage Bolt (20)
Advertising