Canon D10 - Manual (Page 143)

143
You can change the front cover using the Front Cover Set FC-DC1 (Sold
Separately).
Remove the screws.
● Using the tool included in the accessory
set, remove the two screws.
● Take care not to lose the screws.
However, spare screws are included with
the accessory set.
Remove the front cover.
● Using the removal tab, lift the cover in the
direction of the arrow to remove.
Put on a new cover.
● Place the desired cover as shown in the
image, and press it until it clicks into
place.
● Make sure there is no space between the
front cover and the camera.
Screw in the cover.
● Replace the screws removed in Step 1.
Changing the Front Cover
Removal tab
Do not remove other screws besides the two on the front cover.