Canon D10 - Manual (Page 68)

68
You can select the settings for various functions to suit your preferences. AE
stands for Auto Exposure.
Select the shooting mode.
● After pressing the 4 / E button, use the
qr buttons to select G and press m.
Adjust the settings according to
your purposes
(pp. 68 – 77) .
Shoot.
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value display in red. Try the following
settings to obtain the correct exposure.
• Turn on the flash (p. 68)
•
Select a higher ISO speed (p. 73)
You can make the flash fire every time you shoot. At maximum wide angle,
the flash range is approximately 30 cm – 3.2 m (1.0 – 10 ft.), and at
maximum telephoto, it is 30 cm – 2.0 m (1.0 – 6.6 ft.).
Select
h.
● After pressing the r button, press the qr
buttons to select h, then press the m
button.
Once set,
h will appear.
G Shooting in Program AE
What if the shutter speed and aperture value are displayed
in red?
h Turning the Flash On