Generac Power Systems 00802-3 - Manual (Page 5)

READ THIS MANUAL THOROUGHLY
If you don't understand any portion of this manual,
contact Generac for a demonstration of actual start­
ing, operating and servicing procedures.
Throughout this publication and on tags and decals
affixed to the generator, DANGER, WARNING, CAU­
TION and NOTE blocks are used to alert you to spe­
cial instruction about a particular operation that may
be hazardous if performed incorrectly or carelessly.
Observe them carefully.
These safety warnings cannot eliminate the hazards
that they indicate. Strict compliance with the special
instructions while performing the service plus "com­
mon sense" are major measures to prevent acci­
dents.
The following definitions apply to DANGER WARN­
ING, CAUTION and NOTE blocks found throughout
the manual.
DANGER; Indicates an immediately hazardous sit­
uation which, if not avoided, wiii resuit in death or
serious injury. Danger is iimited to the most
extreme situations.
WARNING: Indicates a potentially hazardous situa­
tion which. If not avoid^, could result in death or
serious Injury.
CAUTION: Indicates a potentially hazardous situa­
tion which, if not avoided, may result in minor or
moderate injury. Caution may also be used to alert
against unsafe practices.
NOTE: Indicates a statement of company policy as
the message relates directly or indirectly to the safety
of personnel or protection of property.
These symbols indicate the following:
Points out important safety information and, if
not followed, could endanger personal safety
and/or property of yourself and others.
A
Potential fire hazard
Potential electrical shock hazard
Potential explosion hazard
The operator (driver) is responsible for proper and
safe use of the vehicle, equipment on the vehicle, and
the safety of all vehicle occupants. We strongly rec­
ommend that the operator read this Owner's Manual
and thoroughly understand all instructions before
using this equipment. We also strongly recommend
instructing other occupants in the vehicle to properly
start and operate the generator. This prepares them if
they need to operate the equipment in an emergency.
OPERATION AND MAINTENANCE
It is the operator's responsibility to perform all safety
checks; to make sure that all maintenance for safe
operation is performed promptly; and to have the
equipment checked by an Authorized Dealer periodi­
cally. Normal maintenance service and replacement
of parts are the responsibility of the Owner/Operator
and, as such, are not considered defects in materials
or workmanship within the terms of the warranty.
Individual operating habits and usage contribute to
the need for maintenance service.
Proper maintenance and care of your industrial
mobile generator assures a minimum number of prob­
lems and keeps your operating expenses at a mini­
mum. See your authorized Dealer/Distributor for ser­
vice aids and accessories.
HOW TO OBTAIN SERVICE
When your mobile generator set requires servicing or
repairs, simply contact an Authorized Service Facility
for assistance. Service technicians are factory-
trained and are capable of handling all of your service
needs.
When contacting an Authorized Service Facility or the
factory about parts and service, always supply the
complete model number and serial number of your
unit as given on its data decal.
The warranty on your generator is included in this
Owner's Manual, as well as listings for repair parts.
SERVICE DEALER LOCATION
TO LOCATE THE NEAREST GENERAC SERVICING DEALER, PLEASE CALL OUR 800 NUMBER.
ONLY DEALER LOCATION INFORMATION CAN BE OBTAINED AT THIS NUMBER.
1
-
800
-
333-1322
3
—