Husqvarna 500 H - Manual (Page 14)

13. Be aware of your responsibility as user towards third parties in the working
area.
14. The trimmer must be properly checked and serviced. If the blades get
damaged they should only be exchanged in pairs. In the event of damage
from impact, specialist inspection is essential.
15. Only use extension leads which have been authorised for outside use. These
flexes must not be lighter than PVC covered flex conforming to 227 lEC 53.
They must be water spray protected. If the flex has to be changed, replace
it only with authorised flex H05 VV P with centrally shaped plug to fit sockets
complying with lEC 320. Equipment which will be used in different outside
locations must be onnected via residual current operated switches.
16. Ensure that the equipment is stored safely after use in such a way that the
blade cannot be touched.
17. When using the equipment hold it securely with both hands, stand firmly and
ensure that you have sufficient working space. There should be no people,
animals or objects within the working area. Select the cutting height so that
the blade does not make contact with the ground and you can operate the
equipment from a secure position.
18. Take care when transporting the equipment. For initial use of the hedge
trimmer we would recommend that in addition to reading the operating
instructions, you also seek a practical demonstration from an expert.
19. Always ensure that all protective devices and handles are properly fitted.
Never attempt to use an incomplete machine.
5. Pictogram illustration and explanation
Guide to identification plate
Remove plug immediately if the
power flex is damaged or cut
Do not use this electric power
tools in wet wether conditions!
Warning! Read operation
instructions before use
12