Generac Power Systems 0661-5 - Manual (Page 29)

OPTIONAL ACCESSORIES
A plug-in receptacle (Figure 31) is provided on the gen­
erator set, near the AC connection wires. Use this
receptacle to connect an optional remote-mounted
start/stop panel to the generator. Installation of such a
panel will permit you to start and stop the generator
engine from any convenient location inside the vehicle.
Figure 31 — Remote Panel Plug-in Receptacle
MODEL 9043
REMOTE PANEL MODELS
■ MODEL 9042__________________________
This remote panel (Figure 32) mounts a rocker type
start/stop switch and a “Generator Run” advisory
lamp. The lamp will turn on to indicate the engine is
running.
Figure 32 — Model 9042 Remote Panel
©
R.V.
©
This panel mounts a rocker type switch, a “Generator
Run” lamp and an hourmeter (Figure 33). Use the
hourmeter in conjunction with the periodic mainte­
nance schedule for your generator.
Figure 33 — Model 9043 Remote Panel
o o
GENERAC R.V. GENERATOR
OB\L Q RUN
STOP BTART
TOTAL HOURS
REMOTE PANEL CABLES
Interconnection cables are available from Generac for
connecting the optional remote panels to the genera­
tor receptacle.
• To order a 10-foot long, 4-wire cable, specify Model 9045.
• To order a 30-foot long, 4-wire cable, specify Model 9046.
— 27