Cisco 7971G-GE - Manual (Page 16)

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
7-16
Cisco Unified IP Phone 7970G/7971G-GE for Cisco Unified Communications Manager 6.0
OL-12232-01
Firmware Versions Screen
The Firmware Versions screen displays information about the firmware version
that is running on the phone.
Table 7-4 explains the information that is displayed
on this screen.
To display the Firmware Version screen, follow these steps:
Procedure
Step 1 Press the Settings button.
Step 2 Select Status.
Step 3 Select Firmware Versions.
To exit the Firmware Version screen, press the Exit softkey.
Table 7-4 Firmware Version Information
Item Description
Load File Load file running on the phone
App Load ID Identifies the JAR file running on the phone
JVM Load ID Identifies the Java Virtual Machine (JVM) running
on the phone
OS Load ID Identifies the operating system running on the phone
Boot Load ID Identifies the factory-installed load running on the
phone
DSP Load ID Identifies the digital signal processor (DSP) software
version used
Expansion Module 1
Expansion Module 2
Identifies the load running on the Expansion
Module(s), if connected to and SCCP phone