Maintenance and storage, Safety decals, Decal locations – Troy-Bilt 12087 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAINTENANCE AND
STORAGE
1. Never perform maintenance
when engine is running or spark
plug wire is connected except
when specifically directed to do so.
2. Keep tiller, attachments and ac
cessories in safe working condition.
3. Check all nuts, bolts, and screws
frequently for proper tightness.
Always verify your equipment is in
safe working condition.
4. Never store the machine with
fuel in the fuel tank inside a build
ing where fumes may reach an
open flame or spark, or where igni
tion sources are present (such as
hot water and space heaters, fur
naces, clothes dryers, etc.).
5. Let the engine cool down before
storing it in an enclosure.
6. To reduce fire hazard possibili
ties, keep the engine free of grass,
leaves or grease.
7. Store gasoline in a cool, well-
ventilated area, safely away from
any spark- or flame-producing
equipment. Store gasoline in an
approved container, safely out of
the reach of children.
8. Refer to the Maintenance sec
tion in this Manual for storage in
formation if your tiller is to be
stored for an extended period.
9. If the fuel tank has to be drained,
do so outdoors.
10. Follow manufacturer’s recom
mendations for safe loading, unload
ing, transport, and machine storage.
SAFETY DECALS
Make certain that all safety decals on this equipment
are kept clean and in good condition. The safety
decal locations are shown (at a reduced size) below.
There are other decals located on your equipment for
operation and controls identification. They are shown
in your Parts Catalog. If you need a replacement
decal, please refer to the Parts Catalog that accompa
nied this Manual.
Decal Locations
A)
WARNING: Hot Surfaces decal.
On Briggs & Stratton engines, located
on top of the air cleaner housing.
C)
WARNING: Operating and
Safety Instructions decal.
E)
Forward
Interlock Lever
decals (2).
F)
Engine Stabilization
decal. On Briggs & Stratton
engines, located on the fuel
tank.
B)
WARNING: Engine Ignition. On elec
tric start models only.
D)
Power Unit Operating
Instructions decal.