Installation check list – Generac Power Systems 91355 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

INSTALLATION CHECK LIST

LOCATION AND SUPPORT

___1. The generator is properly located.

___2. The generator is properly supported.

___3. The generator is properly restrained.

COMPARTMENT

___1. Compartment construction is proper.

___2. Holes/openings are vapor-sealed.

___3. Compartment size is correct.

___4. Compartment is vapor-sealed.

___5. Sound insulation is O.K.

___6. Floor cutouts property completed.

COOLING and VENTILATING AIR

_1. Air flow is adequate.

_2. Air inlet opening is correct.

_3. Compensate for restrictions

4. Installation has been tested

GASOLINE FUEL SYSTEM

___1. Fuel tank complies with code.

___2. Fuel system properly installed.

OPTIONAL PROPANE GAS SYSTEM

___1. System is properly installed.

___2. Correct pressure at regulator inlet.

___3. Rated flow of primary regulator is O.K.

___4. All parts are properly installed.

___5. System was properly tested for leaks.

___6. System properly tested/adjusted.

ELECTRICAL CONNECTIONS____________

___1. Comply with code requirements.

___2. Junction box properly installed.

___3. Wiring meets all standards.

___4. All connections are correct.

___5. Conduit properly installed and sealed.

___6. Generator properly bonded to vehicle.

BATTERY INSTALLATION_____________

___1. Recommended battery is installed.

___2. Recommended cables are installed.

___3. Cables are clean and tight.

___4. Cables are properly connected.

___5. Proper ventilation is provided.

EXHAUST SYSTEM

POST INSTALLATION TESTS

___1. Complies with code requirements.

___2. Properly and safely installed.

___1. All tests properly completed.

26

Advertising