Canon A75 - Manual (Page 101)

99
Various Functions
z When the print type
(p. 100) is set to [Index],
select an image using
or and mark or
remove marks from
images using
or .
A check mark appears
on the marked image.
z You can press the zoom lever and use the
same procedures to select images in index
playback (three images).
All the Images on a CF Card
z Press the zoom lever to
switch to index playback
(three images).
z You can set one copy of
each image to print by
pressing the SET button,
then selecting [Mark all]
using
or , and
pressing the SET button
again.
z When the print type is set to [Standard] or
[Both], the setting for the number of print
copies can be changed for each image.
When [Index] is selected, the print settings
can be deleted. For the instructions on
changing settings, please reread Step 3 from
the beginning.
z You can cancel all the settings by selecting
[Clear all].
4
Press the MENU button.
z The setting will be complete and the Print
Order menu will reappear.
z Images are printed in order from oldest
to newest by the shooting date.
z A maximum of 998 images can be set.
z When [Print Type] is set to [Both], the
number of copies can be set. When it is
set to [Index], the number of copies
cannot be set (only one copy will be
printed).
z Print settings can also be assigned to
images with the bundled software
programs ZoomBrowser EX or
ImageBrowser on a computer. However,
do not set the date in the DPOF print