Canon A75 User Manual

Page 126

Advertising
background image

124

Troubleshooting

The batteries are
consumed quickly.

Battery capacity drops due to low
ambient temperatures.

z If shooting in a cold area, keep the batteries

warm (by placing them in an inner pocket, etc.)
until ready to use them.

Battery terminals are dirty.

z Wipe them well with a dry cloth before use.

The batteries have not been used
for over a year.

z Performance should return to normal after

several charging cycles.

Battery life exceeded.

z Replace all 4 batteries with new ones.

If using
rechargeable
batteries: Batteries
do not charge in
separately sold
battery charger.

Batteries were placed in the
charger in the wrong direction.

z Put batteries back into the charger in the

correct direction.

Poor electrical contact, between
batteries and the charger.

z Be sure to set batteries firmly into the charger.
z Be sure that the power cord is firmly

connected to the charger, and is firmly plugged
in to the power outlet.

Battery terminals are dirty.

z Wipe them well with a dry cloth before charging.
z Reload the batteries several times.

Battery life exceeded.

z Replace all 4 batteries with new ones.

Shots are blurry or
unfocused.

The camera was moving when you
took the shot.

z Hold the camera steady when shooting.

Autofocus function hampered by
obstruction to AF-assist beam.

z Be careful not to block the AF-assist beam

flash part with a finger or other object.

The AF-assist beam settings are
set to [Off].

z Turn the [AF-assist beam] setting [On] (p. 67).

Problem

Cause

Solution

Advertising